Cisco ASA5505
ASA5505(config)# write memory
ciscoasa(config)# write erase
Erase configuration in flash memory? [confirm] [OK] ciscoasa(config)# reload
System config has been modified. Save? [Y]es/[N]o: N
Proceed with reload? [confirm] ciscoasa(config)#
***
*** — START GRACEFUL SHUTDOWN —
Shutting down isakmp
Shutting down webvpn
Shutting down File system
***
*** — SHUTDOWN NOW —
Process shutdown finished
Rebooting
Ciscoasa> enable
Password: cisco
ciscoasa# configure terminal
ciscoasa(config)#
Would you like to enable anonymous error reporting to help improve
the product? [Y]es, [N]o, [A]sk later: N
In the future, if you would like to enable this feature,
issue the command “call-home reporting anonymous”.
Please remember to save your configuration.
At this point we need to note that when starting off with the factory default configuration, as soon as we enter the ‘configure terminal’ command, the system will ask if we would like to enable Cisco’s call-home reporting feature. We declined the offer and continued with our setup:
ciscoasa(config)# hostname ASA5505
ASA5505(config)# enable password firewall.cx
ASA5505(config)# username admin password s1jw$528ds2 privilege 15
ASA5505(config)# interface vlan 1
ASA5505(config)# description Private-Interface
ASA5505(config-if)# ip address 10.71.0.1 255.255.255.0
ASA5505(config-if)# no shutdown
ASA5505(config)# interface vlan 2
ASA5505(config)# description Public-Interface
ASA5505(config-if)# ip address 192.168.3.50 255.255.255.0
ASA5505(config-if)# no shutdown
ASA5505(config)# interface ethernet 0/0
ASA5505(config-if)# switchport access vlan 2
ASA5505(config-if)# no shutdown
ASA5505(config)# interface vlan 2
ASA5505(config)# description Public-Interface
ASA5505(config-if)# ip address dhcp setroute
ASA5505(config-if)# no shutdown
ASA5505(config)# interface ethernet 0/1
ASA5505(config-if)# no shutdown
ASA5505(config-if)# interface ethernet 0/2
ASA5505(config-if)# no shutdown
ASA5505(config)# interface vlan 1
ASA5505(config-if)# nameif inside
INFO: Security level for “inside” set to 100 by default.
ASA5505(config)# interface vlan 2
ASA5505(config-if)# nameif outside
INFO: Security level for “outside” set to 0 by default
ASA5505(config)# route outside 0.0.0.0 0.0.0.0 192.168.3.1
ASA5505(config)# ping 192.168.3.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.3.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
ASA5505(config)# route outside 10.75.0.0 0.0.0.0 10.71.0.100
ASA5505(config)# route outside 10.76.0.0 0.0.0.0 10.71.0.100
from BITCOIN NEWS https://ift.tt/2KV06Zo
via Bitcoin News Update
from Bitcoin News Update https://ift.tt/2KGmUgc
via IFTTT
ASA5505(config)# write memory
ciscoasa(config)# write erase
Erase configuration in flash memory? [confirm] [OK] ciscoasa(config)# reload
System config has been modified. Save? [Y]es/[N]o: N
Proceed with reload? [confirm] ciscoasa(config)#
***
*** — START GRACEFUL SHUTDOWN —
Shutting down isakmp
Shutting down webvpn
Shutting down File system
***
*** — SHUTDOWN NOW —
Process shutdown finished
Rebooting
Ciscoasa> enable
Password: cisco
ciscoasa# configure terminal
ciscoasa(config)#
Would you like to enable anonymous error reporting to help improve
the product? [Y]es, [N]o, [A]sk later: N
In the future, if you would like to enable this feature,
issue the command “call-home reporting anonymous”.
Please remember to save your configuration.
At this point we need to note that when starting off with the factory default configuration, as soon as we enter the ‘configure terminal’ command, the system will ask if we would like to enable Cisco’s call-home reporting feature. We declined the offer and continued with our setup:
ciscoasa(config)# hostname ASA5505
ASA5505(config)# enable password firewall.cx
ASA5505(config)# username admin password s1jw$528ds2 privilege 15
ASA5505(config)# interface vlan 1
ASA5505(config)# description Private-Interface
ASA5505(config-if)# ip address 10.71.0.1 255.255.255.0
ASA5505(config-if)# no shutdown
ASA5505(config)# interface vlan 2
ASA5505(config)# description Public-Interface
ASA5505(config-if)# ip address 192.168.3.50 255.255.255.0
ASA5505(config-if)# no shutdown
ASA5505(config)# interface ethernet 0/0
ASA5505(config-if)# switchport access vlan 2
ASA5505(config-if)# no shutdown
ASA5505(config)# interface vlan 2
ASA5505(config)# description Public-Interface
ASA5505(config-if)# ip address dhcp setroute
ASA5505(config-if)# no shutdown
ASA5505(config)# interface ethernet 0/1
ASA5505(config-if)# no shutdown
ASA5505(config-if)# interface ethernet 0/2
ASA5505(config-if)# no shutdown
ASA5505(config)# interface vlan 1
ASA5505(config-if)# nameif inside
INFO: Security level for “inside” set to 100 by default.
ASA5505(config)# interface vlan 2
ASA5505(config-if)# nameif outside
INFO: Security level for “outside” set to 0 by default
ASA5505(config)# route outside 0.0.0.0 0.0.0.0 192.168.3.1
ASA5505(config)# ping 192.168.3.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.3.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
ASA5505(config)# route outside 10.75.0.0 0.0.0.0 10.71.0.100
ASA5505(config)# route outside 10.76.0.0 0.0.0.0 10.71.0.100
from BITCOIN NEWS https://ift.tt/2KV06Zo
via Bitcoin News Update
from Bitcoin News Update https://ift.tt/2KGmUgc
via IFTTT
